gear ring
英 [ɡɪə(r) rɪŋ]
美 [ɡɪr rɪŋ]
网络 齿圈; 齿轮戒指; 齿环; 环齿
双语例句
- Sealing rings are respectively arranged among the end caps, the outer gear shaft sleeves and the inner gear ring.
所述端盖与外齿轴套、内齿圈之间分别设置有密封圈。 - The stress test and the strength analysis about the gear ring of ladle rotating table
钢包旋转台齿圈的应力测试与强度分析 - The Gear Ring is made from high quality matte stainless steel.
齿轮戒指由高品质的亚光不锈钢制造。 - The housing is arranged outside the drill body, and the clamping jaw for clamping and the gear ring for controlling the clamping jaw are arranged in the drill body.
钻体的外面设置有外套，钻体内设置有夹持用的夹爪和控制夹爪用的齿圈。 - The machine unit is made up of charging bucket, stepped gear, pulverizing knife, gear ring, pulverizing motor, discharging port, fan blade, aggregating box, dust collection box, etc.
该机由加料斗、分级轮、粉碎刀片、齿圈、粉碎电机、出料口、风叶、集料箱、吸尘箱等部分组成。 - The epicyclic gear train is connected with the erection seat through the skip key at the internal spline of the sun gear via an internal gear ring, an epicyclic gear and a sun gear.
行星轮系由内齿轮圈，行星齿轮，中心齿轮，在中心齿轮的内花键经跳健与装置座连接。 - It has a drum with gear ring fitted on it which is driven by pinion.
它有一个桶，上面安装了由小齿轮驱动的齿圈。 - Improvement of Precision Forging Process for a Outer Cone Gear Ring in Double Cone Synchronizer
双锥同步器外锥环精密锻造工艺的改进 - The Quality Analysis for Gas Nitrocarburized Inner Gear Ring of Heavy Truck
重型汽车内齿圈气体氮碳共渗质量分析 - Rectification Hardening Application in Case Hardening Deformation Control for Inner Gear Ring of Large Driving Gearbox
矫正淬火在大型传动齿轮箱内齿圈渗碳淬火变形控制中的应用 - Abstract Producing the flywheel gear ring with a flat steel by an old flash butt welding process is replaced by a casting blank and rolling to form the gear ring process, not only the investment is saved but also the product quality is improved.
采用铸造制坯、辗环成形新工艺替代用扁钢闪光对焊生产飞轮齿环的老工艺，不仅节省了投资，而且提高了产品质量。 - A New Method of Cutting Tooth of Gear Ring without Gear Hobbing Machine
不用滚齿机加工齿圈齿形的新方法 - A Study on the Deformation in Large Gear Ring Machining and Its Preventive Measures
大型齿圈加工变形与防治措施的研究 - Introduced the application of semi-solid liquid forging processing technology to produce copper based gear ring rough pipe casting. A comparison analysis combined with characters of both continuous casting and centrifugal casting was made.
介绍了应用半固态液锻方法生产铜基齿环毛坯管的工艺，结合连续铸造工艺、离心铸造工艺特点进行了对比分析。 - The basic structure and measurement principle of automatic measuring system for the flywheel gear ring are described, as well as the design of the computer hardware.
介绍了飞轮齿圈自动检测系统的基本结构、测量原理及计算机硬件设计。 - Erection and Alignment of Big Gear Ring of Rotary Kiln
回转窑大齿圈的安装与找正 - The last, A strength evaluation of the big gear ring was obtained by the theory of the finite element analysis.
最后应用有限元计算理论给出了大齿圈的强度评价。 - A new method for cutting the profile of tooth of large gear ring
一种大型齿圈齿形加工的新方法 - Heat Treatment Distortion of Heavy Carburizing Gear Ring and Its Control
大型渗碳齿轮圈热处理畸变与控制 - The strength question of a key component-the big gear ring, about the equipment of ladle rotating table in a steel plant is discoursed.
讨论了某钢厂钢包旋转台设备中的一个关键零件&大齿圈的强度问题。 - This paper has analysed load distribution of gear ring which is affected engaged deviation and cumulative pitch error, and comparing three analysis results.
对啮合偏移和周节累积误差分别和共同对轮齿载荷分布的影响进行了分析，并将分析结果进行了比较。 - Research on Heat-treatment and Microstructure and Properties of Manganin Used in Car Synchro Gear Ring
轿车同步器锰黄铜齿环精锻后的热处理及组织性能研究 - Dust-proof and Lubrication of Gear Ring in Bunker Feeder
斗轮堆取料机齿圈的防尘与润滑 - The Study on Ultrasonic Testing of the Laser-Welding Seam Depth of the Gear Ring
齿轮环激光焊缝深度超声检测的研究 - Study on Precision Forging of Steel Synchronizer Gear Ring
钢制同步器齿环精密成形技术研究 - Research on automatic measuring system for flywheel gear ring
飞轮齿圈自动检测系统 - Then, turnover was introduced based on the working principle of soft starter, through the speed motor rotor speed to change change within the gear ring cycle gear train speed, in order to realize the soft starter of belt conveyor.
然后，介绍了基于周转轮系软起动装置的工作原理，通过调速电动机改变转子转速来改变周转轮系内齿圈的转速，以实现带式输送机的软起动。 - At present, the enterprise manufacturers realize the fine blanking of steel back plate without gear ring through the modification of ordinary press, making the above problem solved.
目前企业厂家通过改装普通压力机，实现了钢背无齿圈精冲，使得上述问题得到了解决。 - Base on the error compensation principle, compare and analysis the two measuring head design ( pump body ring pressure and gear ring pressure), select the gear ring pressure measuring head to prevent measurement pump axial channeling dynamic.
从误差补偿的角度对比分析了泵体环压和齿轮环压两种测量头的设计方案，选择齿轮环压测量头以防止测量时齿轮泵的轴向窜动。 - The conception and means of coarse adjustment and delicate adjustment is imported to guarantee exactitude engagement of pinion wheel and big gear ring, which minimize the occurrence of teeth breakdown and deformation.
引入粗调、微调的概念和方法，确保小齿轮和大齿圈两转动副始终保持正确的啮合状态，使得断齿和形变现象减至最少。